top of page
22" Wheel Vinyl Decals for Rivian R1T/R1S

22" Wheel Vinyl Decals for Rivian R1T/R1S

The Rivian supplied 22" wheels give the truck a sporty look but if you want the dark variant you'll have to fork over an extra 1,000 dollars. Well not anymore now you can easily recreate the look or even go for a whole new look on your dark wheels with our vinyl kit. This 10pc per wheel kit covers up all the silver shapes and creates a more modern dark or stealth look that many desire. 


Installation is very straightforward. Clean the wheels with rubbing/isopropyl alcohol and a soft rag, be sure to get into the gap between the rim and the tire. Spray the surface with water mixed with just a drop of dish soap and apply the decal over the silver. The soap and water will allow the decal to slide around freely for easier alignment. Once everything lines up press down with a squeegee on the flat areas and your fingers around the more intricate parts. After everything is initially tacked down let the sun do its work, simply allowing the decals to dry overnight will help them adhere and will dry out the edges which then can be gently rolled down anywhere there is overhang, a hair dryer or heat gun can be used to speed up this process (see the video above for a similar install). 


The vinyl is automotive and "is expected to last 5-7 years outdoors" according to the manufacturer. It can be washed and is 3.9mils thick. Kit includes a 44 pc decal set (22 of each shape) which is enough to cover all 4 wheels with a couple additional pieces for any future scuff, installation errors or cutting misalignments. Also available is the spare tire inclusive 54pc kit which will be plenty to cover all 5 wheels.

  • Tips

    Start on the top most spoke, then drive the car forward or backwards so you are always working on the top spoke and not fighting gravity.


    Heat is your friend for the outer edges, it might take several passes/days in between as the vinyl conforms to the new shape.


    Rubbing alcohol can help adhere vinyl in seconds by just misting under the part that won't stick and pressing down for 20-30 seconds.

  • Disclaimer

    This product is not affiliated with or endorsed by Rivian Automotive, LLC.